Use:
CUTFiT 32A is designed for chip machining operations with precisely definable tool cutting edge geometry (turning, milling, drilling, material cutting, threading and reaming, it can also handle internal broaching operations, but only in material with good machinability). It is particularly suitable for machining at higher cutting speeds. Not suitable for machining copper.
Characteristics:
Parameter | Unit | Standard | Value |
Viscosity at 40 °C | mm2/s | EN ISO 3104 | 32 |
Density at 15 °C | kg/m3 | EN ISO 3675 | 890 |
Point of fluidity | °C | CSN ISO 3016 | -30 |
Flash point in o.k. | °C | EN ISO 2592 | 230 |
Corrosion - steel (20°C/24 h) | CSN 65 6074 | negative |
Foaming | Unit | Standard | Value |
At 25 °C, max. | cm3/cm3 | CSN 65 6238 | 0/0 |
At 95 °C, max. | cm3/cm3 | CSN 65 6238 | 10/0 |
At 25 °C to 95 °C, max. | cm3/cm3 | CSN 65 6238 | 0/0 |
Classification:
ISO VG 32, ISO-L-MHF
Volume: | 200 l |
---|---|
Weight: | 195 kg |
Height: | 880 |
Width: | 585 |
Depth: | 585 |